Aircraft Potable water service truck

Description

Aircraft Potable water service truck chassis cab for the flat head, single seat, two-door type, passenger 2 people; drive type for 4 × 2, fresh water tank volume of 4m ⊃3;, fresh water flow ≥ 150L/min. Aircraft Potable water service truck The water pump is installed in the lower right front end of the box, directly connected with the outlet of the water tank, the water pump adopts stainless steel centrifugal pump, driven by hydraulic motor. The water pump is made of stainless steel, with mechanical sealing, and the lowest part of the water pump is equipped with a water discharge screw plug. In the water pipeline system is equipped with a safety regulator, according to the actual use of the water supply can be adjusted when the water pressure (general conditions, the water supply pressure of 0.25Mpa ~ 0.40Mpa). The water hose is a food-grade delivery hose, and there is a water filling connector at the end of the outlet pipe, which can be quickly connected with the water filling port of the aircraft, and there is a cut-off valve on the working platform at the middle of the water supply pipeline, which is used for controlling the backflow of the water in the water supply pipeline and the flow rate of the water. An electronic turbine-type flow meter is installed in the pipeline, which makes it easy to see the amount of water and flow rate of each filling. Overall length mm: 7265 Overall width mm: 2140 Overall height mm: 2295 Wheelbase mm: 3815 Wheelbase (front/rear) mm: 1504/1425 Front overhang mm: 1010 Rear overhang mm: 2440 Fresh water compartment volume L: 4000 Approach angle (°): 22 Departure angle (°): 6 Minimum ground clearance mm: 200 Outer diameter of access circle mm: 17000 Overall mass kg: 4160 Maximum speed km/h: 80 Maximum operating speed km/h: 50 Water supply flow rate L/min: ≥150 Water supply pressure Mpa: 0.25-0.40 Pump material: stainless steel corrosion-resistant pump Platform lifting height mm: 400-3000 Maximum platform load kg: 200 Jiangsu Tianyi Aviation Industry Co., Ltd. Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China Shanghai Office: Floor 6th, Bld 36, No.1218 Huateng Road, Qingpu District Shanghai, P.R.China Tel: +86 21 5049 6088 / +86 400 9980 919 Mobile: +86 137 6133 5725 (As WeChat) +86 189 6407 9542 E_ mail: malie@jstianyi.com.cn joinsun@jstianyi.com.cn airport.gse@jstianyi.com.cn Website: www.tianyi-gse.com